Rancho Shocks Suzuki Application Guide
| YEAR | MODEL | RAISED HEIGHT | RS9000XL FRONT | RS9000XL REAR | RS7MT FRONT | RS7MT REAR | RS5000 / RS5000X™ FRONT | RS5000 / RS5000X™ REAR |
|---|---|---|---|---|---|---|---|---|
| SUZUKI | ||||||||
| SUZUKI — Samurai 4 W.D. | ||||||||
| 1995-85 | 4WD Samurai | 1½" | — | RS999119 | — | RS77119 | — | RS55119 |
| SUZUKI | ||||||||
| SUZUKI — Sidekick | ||||||||
| 1998-89 | Sidekick | 0" | — | RS999349 | — | — | — | — |
[1] Front shock must be installed rod end down (without shock boot). [20] Additional washers may be required to increase space between shocks on lower mount. [2] Qty. Req. 2 [23] I.D. of shock bushing is smaller than mounting pin & requires lubrication & extra effort for installation. [24] Slight grinding of lower control arm is required. [27] Bumpstop must be lowered 2" or damage to shock will occur. [152] This is spring-shock absorber. [313] Not for use with aftermarket shock spacers or relocation brackets.